冲压机械手看着很简单，就是铜铜铁铁打造的，然而，一台冲压机械手的研发定制是经过千千万万次测试的，新常态下越来越多的传统制造业企业都将由机器人逐渐替代，而且这还会慢慢的普及下去，渐渐融入人们的日常生活。自动化生产深深的融入各个领域，生活将会更加便捷，尤其是冲压机器人、冲压机械手、注塑机机器人更是成为了工厂的一部分。
Stamping manipulator looks very simple, is copper and copper iron built, however, a stamping manipulator R & amp; d customization is after thousands of tests, the new normal under more and more traditional manufacturing enterprises will be gradually replaced by robots, and this will slowly popularize, gradually integrated into peoples daily life. Automated production is deeply integrated into all fields, life will be more convenient, especially stamping robots, stamping manipulators, injection molding machine robots have become part of the factory.冲床
随着中国制造2025的提出和互联网 的普及，很多地区的工厂都进行了机器换人，但是在操作冲压机械手的时候还是有很多要注意的地方，今天我们就来和大家说说冲压机械手操作注意事项。
With the proposal of "Made in China 2025" and the Popularization of "internet", factories in many areas have carried out "machine replacement", but in the operation of stamping manipulator There is still a lot to pay attention to, today we come to talk to you about stamping manipulator operation precautions.冲床
在操作上下料机器人之前一定要注意检查电器控制箱内是否有水、油进入，若电器受潮，切勿开机，并且要检查供电电压是否符合，前后安全门开关是否正常。验证电动机的转方向是否一致，然后打开电源。在冲压机械手需要拆除的时候，其中对关掉射出机电源；关掉机械手电源；关掉机械手气压源。
Before operating the loading and unloading robot must pay attention to check the electrical control box whether there is water, oil into, if the electrical appliances damp, do not turn on, and to check whether the supply voltage is in line with, before and after the safety door switch is normal. Verify that the turn direction of the motor is consistent, and then turn on the power supply. When the stamping manipulator needs to be removed, it turns off the ejection electromechanical source, turns off the manipulator power supply, and turns off the manipulator air pressure source.冲床
洩除空压，放松引拔气缸固定板固定螺丝，并移动手臂，移动缓冲器座，使其靠近手臂。旋紧引拔气缸固定板，让手臂不能移动，将旋转安全螺丝锁好，使机械手不能旋转等，这些细节方面的问题都应该注意。
Remove the air pressure, relax the pull-out cylinder fixing plate fixing screws, and move the arm to move the buffer seat so that it is close to the arm. Tighten the drawing cylinder fixing plate, so that the arm can not move, will rotate the safety screws lock, so that the manipulator can not rotate, and so on, these details of the problem should be noted.冲床
深圳市创盈时代科技有限公司是一家专注于冲床机械手,上下料机械手,五金冲压机械手，工业机器人，非标自动化设备的研发生产和销售于一体的国家高新技术厂家。
本文关键词：冲压机械手操作注意事项
客服 